BERGER LAHR 3 PHASE STEPPER MOTOR AND CONTROLLER

BERGER LAHR 3 PHASE STEPPER MOTOR AND CONTROLLER 1) AC220V 2) shaft diameter: 24mm 3) shaft length: 50mm 4) CE, ISO

BERGER LAHR 3 PHASE STEPPER MOTOR AND CONTROLLER has such advantage as high efficiency, energy-saving, low noise, low vibration, "high start torque", "low start current" and reliable performance. They are easy for installation and maintenance

Specifications:

Model	FHB31325
Step Angle(°)	1.2
Length L(mm)	247
Holding torque(N.m)	35
Current (A)	4.0
Rotor inertia (g.cm2)	41240
Weight (kg)	19.8
Shaft length(mm)	50
Shaft diameter(mm)	24
Step accuracy	5%
Temperature	80°C   Max
Environmental temperature	-20°C ~  +50 °C
Insulation resistance	100M   Ω   Min 500 V DC
Withstand voltage	500V AC 1 minute

CONTROLLER FEATURES

1)16 channels constant angle, constant torque micro steps, highest micro step: 60000ppr

2) Highest response frequency: 200Kpps

3)Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second 

4) Opto-isolated signal I/O

5) Drive current is adjustable in 16 channels from 1.2A/phase to 5.8A/phase (for DVS3722: 1.3A/phase to 7.0A/phase)

6) Single power supply from 110V to 220VAC

7) Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 3s and it is recovered when stepper driver power on or signal MF changes from low level to high level) CURRENT SETTING Stepper

Please contact with us for more detailed technical information.

We can design according to your requirements.

BERGER LAHR 3 PHASE STEPPER MOTOR AND CONTROLLER